Sivusto ei tue käyttämääsi selainta. Suosittelemme selaimen päivittämistä uudempaan versioon.

Rakentelua, kokeiluja ja niihin liittyviä uutisia.

 

Make

 

Instructabels

 

Instructables: RPi

 

Instructables: 3D Printing

 

 

How to Make Your Own Camera Lens
Posted on Wednesday September 05, 2018

WelcomeThese instructions are to create lens for experimental photography on a DSLR camera, the base is a T ring adapter, these area cheap and easy to find, you must get one for the brand/model camera you have.In this sample, I am using three sources for parts, one is a part from an optical device, ...
By: hvegar

Continue Reading »

Astronomy Camera
Posted on Thursday January 17, 2019

Home-Made Remote-Controlled Astronomy Camera 1. Circular Container 2. Intel Compute Stick3. Small Plastic Container4. Arecont 1.55 Arecont 1.55mm 1/2 F2.0 fixed iris, fisheye lens5. 4" Acrylic Dome6. ZWO ASI120MC-S Camera7. 3" Wooden Circular Plate8. Strong Double-Sided Tape9. Weather Sealing Tape...
By: Chaitanya Sanghadia

Continue Reading »

Low Power Weather Station
Posted on Thursday January 17, 2019

Now in it's third version and having been tested for over two years, my weather station gets upgraded for better low power performance and data transfer reliability.Power consumption - not a problem in the months other than December and January, but in these very dark months the solar panel, althoug...
By: Tecwyn Twmffat

Continue Reading »

How to Make a Farmhouse Pantry Door With Glass
Posted on Wednesday January 16, 2019

In this instructable, I show you how to build a DIY farmhouse pantry door with glass using 2x6s. Also, I show you an easy paint distressing technique to make new furniture look old.My friends asked me to design and build a farmhouse pantry door with glass for their house.Like I do with most of my p...
By: jeremyhoffpauir

Continue Reading »

DIY Kreg Jig Pocket Hole Station
Posted on Wednesday January 16, 2019

Who doesn't like to make their tools better? Here is a quick way to make Kreg Pocket Hole Station with drawers and stop blocks. If you want to download the plans, they're available on my website. The nice thing about this project is you only need 1/2 of sheet of 1/2in plywood. So I used scrap I ha...
By: SouthernGinger

Continue Reading »